Posted by a reviewer on Amazon

The only issue is that the locking arm does not go in easily so had to leave this off

Posted by a reviewer on Amazon

I had to cut the vertical bar

Posted by a reviewer on Amazon

The second issue i found was that the screws supplied to attach the vertical bracket to the tb were either too small and or too big i had to buy some from a hw shop

Posted by a reviewer on Amazon

Very sturdy wall mount you will need to buy a huge drill bit to fit it i think its 10 or 8mm but with bolts that size you know this thing isnt coming down in any hurry

Posted by a reviewer on Amazon

My only problem is that the attached spirit level was woefully out of alignment luckily i wasnt relying on it but it can easily be seen once i removed the spirit level that the screw holes made to hold it in are badly aligned

Posted by a reviewer on Amazon

As other reviewers have pointed out dont trust the spiritlevel its hopelessly off level

Posted by a reviewer on Amazon

I had a similar problem to l sharma below in that the struts that attach to the back of the tv were slightly too long by an inch or so were level with the top of the telly and a wee bit ugly so i cut off the extra inch with a hacksaw in about 2 minutes and then mounted the struts lower so that they did not protrude over the top of the telly

Posted by a reviewer on Amazon

Only 4 stars due to the missing parts but if they had been present i would certainly have rewarded that additional 5th star