This works awesome in my Honda F6B with the cup holder cubby

This works awesome in my Honda F6B with the cup holder cubby  Read Less

I have purchased a couple of these - both in 2016. Both have behaved similarly and generally work well with various iPhone ite...  Read More

I have purchased a couple of these - both in 2016. Both have behaved similarly and generally work well with various iPhone iterations (currently using an iPhone 11 with a case). This is essentially a 3-year review for this product. I have been using these in a 2006 Ford F-150 and a 2011 Honda CR-V, both in the center consoles.These holders are sturdy, mounting in a cupholder by twisting the arm in the base of the unit to extend the feet that engage the sides of the cupholder to hold it in place. For both vehicles, there are no significant issues with installation.As others have noted, you can't rotate the arm holding the phone without loosening the base in the cupholder. 99% of the time this is fine, especially as I use the vehicles mostly to commute and am typically driving by myself. But when someone else gets in the passenger seat and they bump into the arm (rotating it) or want to twist the phone so they can also see it, the holder comes loose in the cupholder and has to be reinstalled. While this only takes a few seconds, it is still inconvenient for those instances. Also, it should be obvious (but is worth mentioning) that these only install in cupholders that are rigid at least 2/3 of the way around (or so). The F-150 has pop out cupholders in the dash under the stereo - these cannot be installed in such cupholders with flexible arms that hold drinks in place.Secondly, after a couple years the foam inserts on the small arms holding the phone in place can start moving around or come out. They are just foam inserts in the shape of a C that are stuck to the plastic arms with a sticky tape backside. After a lot of use they move around a bit and don't hold the phone quite as securely as when new. As such, I have lost one foam insert from each of the holders and am now looking for a replacement holder to use.While I like these overall (sturdy, install easily and stay in place if you don't move the arm, etc.), I think I might try a different product the next go around due to the above issues.  Read Less