Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
The motor even at 900ma gets super hot but was within specifications. With all the extra force this has, i'm sure i can drop the current and decrease the heating, but have not done that yet. Been running cool without a fan even feeding an e3d volcano ... Read More
This is a professional quality company that sells a special line of stepper motor. It's more than enough torque and its less than half the size and weight of the standard 64oz stepper.
Motor is fine on geared extruders like the bmg. Works great on my e3d titan extruder, but it does not have a plug on it like most stepper motors. Used on my ender 3 to turn into direct drive.
Recieved as described. No issues whatsoever.
Highlights
Quality
I bought this to use with the e3d titan extruder and it works great
Has no problems pushing filament with the titan aero
So for those who are looking to use this with the extruder on a 3d printer they do work
I have not experience any skips or binding with the motors
Packaging/appearance
The packaging included info card and overall quality of the motor is fantastic
Im keeping it as a backup but am going to use a stronger motor i was just hoping to take the weight off the gantry
Competitiveness
Works great and should be paired with an e3d titan extruder
I switched the stock motor on my monoprice maker ultimate to this one to allow more space between the motor and the frame
Ive got one of these running an e3d titan on my i3 and it doesnt even run warm to the touch
It didnt work at all with a bmg extruder and worked poorly with an ezr extruder eventually not working at all
Overview
- How are reviewers describing this item?
motor, direct, great, hot and little. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 1.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 310 reviews as of our last analysis date on Nov 6 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I have seen a lot of comments with over heating that is most likely because ppl are overdriving it i am running this at 0
Posted by a reviewer on Amazon
So if you are running marlin or klipper run it at or below 0
Posted by a reviewer on Amazon
With all the extra force this has im sure i can drop the current and decrease the heating but have not done that yet
Posted by a reviewer on Amazon
Some reviewers have indicated they were unable to avoid skipping on their geared extruders but whenever it happens to me the extruder is usually jammed beyond recovery and needs to be disassembled and cleared
Posted by a reviewer on Amazon
I had to reedit my design because the motor i received was 0
Posted by a reviewer on Amazon
I use a 31 gear ratio on the extruder and 0
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found