Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
This tpu filament works very well in my elegoo saturn 3d printer. This filament is enjoyable to use. It works on my 3d printer without any modifications.
Tpu is more flexible and can get bound up in the tube. Start with the priline tpu 95a profile in cura then make the following layer height:.
This is a tpu 95a, so the flexibility is on the medium-firm softness. Slightly stiffer than stock rubber bushing. Tpu is both sturdy and flexible.
Cons
Totally failed to print, clogged up bambu lab x1c. I wish i could leave a zero the filament is 1.
Highlights
Quality
The quality was almost as good as pla
Print quality is beautiful with the right settings
Maybe theres an appreciable quality difference to be had there but im not seeing it
I printed very slow 15mmsec and with the filaments recommended temperature and bed settings
Price
Price is kinda steep but its worth it for the consistency
Packaging/appearance
If using infill the “cross” infill in the creality slicer minimizes retracts as well since does an entire layer of infill in one line
Competitiveness
This tpu filament works very well in my elegoo saturn 3d printer
Also compared to some of the other tpu options out there this seems like a pretty solid deal
And you probably need to up your hotend temp 5 to 10 degrees from you average pla setting
Printed at 210c extrusion60c bed infill pattern is 30
Overview
- How are reviewers describing this item?
great, flexible, good, material and little. - Our engine has profiled the reviewer patterns and has determined that there is high deception involved.
- Our engine has analyzed and discovered that 29.6% of the reviews are reliable.
- This product had a total of 128 reviews as of our last analysis date on Dec 23 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I dont know if its the weather changing but recently ive had issues with adhesion between layers
Posted by a reviewer on Amazon
First print popped off looking extra sharp with killer overhangs and bridging
Posted by a reviewer on Amazon
If anyone knows if the blue fluoresces id love to know before i buy it
Posted by a reviewer on Amazon
I was a little concerned about having problems with this because both my machines have bowden tubes
Posted by a reviewer on Amazon
I didnt find out that tpu sometimes has problems with these till after i got it
Posted by a reviewer on Amazon
So far i have only used this for a few fairly small prints which worked out fine but none of them were the long prints that would show up the problems that some people have been having with tangling or feeding
Posted by a reviewer on Amazon
From what ive heard if youre doing larger more complicated prints using tpu with a bowden tube extruder takes a little more care particularly if the tube is longer than average
Review Count History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found