Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
This is the cheapest wood fill filament i could find. This filament is a tiny bit more fickle than the bronze filament, but both filaments have been the easiest filaments to use in the three years i've been 3d printing. If you do end up snapping a pie... Read More
Easy to use. Be mindful of that while using. Once you get it dialed in, it's great! This is my first shot at wood, and it worked beautifully.
The soft texture is very similar to wood turned on a lathe. It is slightly softer than standard pla, but the sandable and stainable finished products have the look and feel of wood. They sell a dremel 3d printer and i buy my regular pla from them. If ... Read More
Cons
Printed with a 1. Very finicky pla. When it works its decent except for the stringing.
Upon close looking more closely, the filament is very glossy almost like its wet or something.
Filament turns into a tar like substance and clogs, never melting enough to extrude from nozzle. If they can't give settings for their specialty filament, i'll have to use other that works right without hours of tweaking.
Highlights
Quality
Product works great and prints best at 195c
Price has gone up since i purchased it last time but the quality is excellent
I started out with the spool of pla that came with my printed and did fairly well but was having bed adhesion and raft curling issues
Ive attached a picture of a boat model i printed for a friend the sail was printed with white petg but everything else was made... Read More
Price
It is definitely a bit more brittle than standard pla but higher infill helps if you can manage it
Packaging/appearance
Keep in mind if the filament is left in the nozzleheatbrake it will jam as it dries out
Competitiveness
A little bit harder to work with than hatchbox wood filament but it turned out well once i dialed in the temperature and slowed... Read More
I used my monoprice mini and it printed well from start to finish
The only thing ive noticed is that it gets wet quickly about 23x faster than standard pla ymmv and i typically have to dry it o... Read More
Overview
- How are reviewers describing this item?
great, good and first. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 27.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 498 reviews as of our last analysis date on Jan 12 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I might have found my new favorite pla
Posted by a reviewer on Amazon
The media could not be loaded
Posted by a reviewer on Amazon
I will say the filament feels brittle as you load it
Posted by a reviewer on Amazon
I had to be careful guiding it through the feeder tube so it wouldnt break
Posted by a reviewer on Amazon
I did use hairspray to help the first layer adhesion
Posted by a reviewer on Amazon
Once parts are cleaned up and sanded it can be stained with any wood stain
Posted by a reviewer on Amazon
You will notice that this filament is somewhat hard on your nozzles so you may opt for a hardened nozzle to prevent wear
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found