Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Silver pla with a black abs label on top of the original silver label. Review for inland 1. The resulting objects are good a strong and look nice.
Adheres to bed like a champ, low low low shrinkage! Good bed adhesion. With an enclosure, heated bed and a good bed adhesive this stuff works very well.
Cons
If you bend it it snaps like dried pasta. Terrible adhesion in spite of different plate temperatures, glue stick, etc.
Once great brand of filament is now just mediocre. Really, garbage, garbage,. Terrible filament. Received 1.
It looks red on the roll but extrude’s brown-ish. Previous version was a bright white, now it has a yellowish tint. The shade of blue is also not great.
Highlights
Quality
Great layer adhesion and the quality is quite good considering im printing a bit fast for an ender 3
Great product works exactly as the description says
After a little more trial and error i ended up printing on my ender 3 v2 at 250c with the cooling fan at 35 and the bed at 110c
Competitiveness
This is my first time trying abs and i was pleasantly surprised at the ease of printing with inlands filament i bought it at a ... Read More
Prints just like my hatchbox abs on a prusa
All in all i found this to be no more fussy than petg
Overview
- How are reviewers describing this item?
good, great, first, color and quality. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 597 reviews as of our last analysis date on Sep 16 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I was thinking that because ive been printing pla for years i could figure out how to print abs
Posted by a reviewer on Amazon
Even running my hot end at 250 and my bed at 80 i got major warping layer adhesion issues and poor bed adhesion
Posted by a reviewer on Amazon
I will fully grant the fact that my home made enclosure for my ender 3 was likely the culprit for many of these issues though
Posted by a reviewer on Amazon
After a few calibration tests the first print i made came out remarkably smooth with zero stringing
Posted by a reviewer on Amazon
The part self released from the build plate glass with a coating of hair spray once it cooled down completely
Posted by a reviewer on Amazon
After a little more trial and error i ended up printing on my ender 3 v2 at 250c with the cooling fan at 35 and the bed at 110c
Posted by a reviewer on Amazon
All in all i found this to be no more fussy than petg
Review Count History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found