Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Cons
This product is not as advertised. No way to return it either.
Highlights
Quality
This ferric chloride is highly suitable for etching steel to reveal complex features and structures in the composition of a blade
Using that ratio it etched my steel just fine so this product has completely worked for me
You have to be careful in the way you mix it with water the ferric chloride must be added in small batches to the water not the... Read More
I then used a 11 mix of this concentrate and distilled water for my working solution which etched my circuits in less than 15 m... Read More
Price
Great price for the quantity just be prepared to wait a while
Much cheaper than buy the liquid version and paying for shipping
75 liters of distilled water 250ml toward the ratio for a concentrate then 1
Shipping
I believe that was a shipping error on a single order i per my picture i received exactly what was described and it worked ver... Read More
It took a very long to arrive but it did eventually get here and it is what it say it is
It came early and was exactly 500g of anhydrous ferric chloride
Packaging/appearance
This is packaged impressively well in a glass bottle wrapped in plastic in a foam block inside a cardboard box
It was also packaged very safely and was well labeled
Theres not much to say about this except the product was sealed correctly and wasnt contaminated with moisture when i received it
Overview
- How are reviewers describing this item?
ferric, easy, received, good and packaged. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has determined that the review content quality is high and informative.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 90 reviews as of our last analysis date on May 17 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
The easy to use 3star rating is only because ferric chloride itself is not that easy to use
Posted by a reviewer on Amazon
You have to be careful in the way you mix it with water the ferric chloride must be added in small batches to the water not the other way round the solution does get hot it is highly corrosive eye and skin protection is well advised and it will stain anything it comes in contact with
Posted by a reviewer on Amazon
I carefully mixed the 500gm of ferric chloride with about 1 pint of distilled water to create a concentrated solution
Posted by a reviewer on Amazon
Of course it would have been quicker if the working solution had been at a higher temperature
Posted by a reviewer on Amazon
I will but this product again
Posted by a reviewer on Amazon
Ive noticed other comments about a lack of directions for how to mix it
Posted by a reviewer on Amazon
I looked it up on the internet and the guideline i found was a 11 ratio of distilled water to powder to make a 34concentrate34 then depending on ones use for it dilute it accordingly
Posted by a reviewer on Amazon
In my case i used it for etching damascus steel and recommendations seemed to be a 13 or 14 ratio of concentrate to water
Review Count History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found