Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Everything uses a small allen wrench which is included. Make sure all set screws are tightened well. Secure the work piece to the worktable. Wear good eye protection.
It adjusts and * well and cuts a very smooth hole. I've used it in softwood and baltic birch plywood. Great for creating exact holes for 4 in dust collection.
The radius gauge is in 1/16” divisions so get out your calculator for. Unlike a closely price competitor this works great and works on my ryobi drill press.
Cons
Both sharpened sides are on the opposite side from the direction of the cut. If it proved to be a case of the blade dulling after only 3/4, then the blade is not very good. The machine table was locked in position and maximum quill extension was 1-1/2... Read More
The drill bit runs about 20-25 thousandths out of round. There was quite a bit of wobble as well.
Not a quality product whatsoever. Cheap chinese junk in my opinion. I hope others have better luck and maybe i got a dud.
Highlights
Quality
This is a really good tool for the right job but be careful with it
Now with the press running slower i thought everything should be well
I started with the 34 mdf that was veneered with african mahagony
Packaging/appearance
And it punched an inchsized hole through the paneling
Competitiveness
I used it to cut circles in a 2x8 board for a project
Great price on a very useful wellmade product
Even came with a 2nd cutter incase 1st one gets dull
Overview
- How are reviewers describing this item?
cut, great, metal, made and good. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 98.
- Our engine has analyzed and discovered that 78.5% of the reviews are reliable.
- This product had a total of 1,367 reviews as of our last analysis date on Oct 14 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Definitely not for hardwood dulled really fast
Posted by a reviewer on Amazon
Just be sure to run it as slow as your machine allows
Posted by a reviewer on Amazon
Needs quite a powerful bench drill to do wider cuts
Posted by a reviewer on Amazon
Its apparent the manufacturer doesnt even attempt to sharpen the tool
Posted by a reviewer on Amazon
As another reviewer stated the cutter is as dull as dishwater which is of course an exaggeration dishwater is much sharper than this tool
Posted by a reviewer on Amazon
Be prepared to spend a fair amount of time to sharpen it
Posted by a reviewer on Amazon
I havent used this with a hand drill im not sure i will
Posted by a reviewer on Amazon
If it failed i figured that i was only out 11 and move on
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found