Posted by a reviewer on Amazon

Too bad i cant find a regulator attachment to view the amount of co2 that im injecting into the vessel

Posted by a reviewer on Amazon

The dip tube should be stainless rather than a silicone tube

Posted by a reviewer on Amazon

First off my unit came with the extra seals and was not fully assembled everything was only finger tight

Posted by a reviewer on Amazon

Even after tightening it did not hold pressure so i wound up using the extra seals just to get it to hold pressure as a couple of the seals were damaged

Posted by a reviewer on Amazon

All you have to do is attach the silicone hose acts like the beer dip tube to a threaded stem at the underside of the tab cap

Posted by a reviewer on Amazon

Do not over pressurize the growler or you will be drinking foam instead of beer

Posted by a reviewer on Amazon

If you will have this connected to a regulated co2 line in a kegerator keep pressures below 8lbs in a 4l and below 4 lbs in a 2l growler

Posted by a reviewer on Amazon

I bought another one and unfortunately it didnt come with extra orings like the first one did