What does this mean?Highlights
Quality
My printer has been flawless for me with the exception of my prints never sticking to the heated bed properly
5x6 and an enclosed printer even with the small mark in the buildtak it is working perfectly and yes i did print over that mark... Read More
So i saw good reviews of this product
Bit expensive but rly increased my print quality
Packaging/appearance
I use a pla raft to print abs and have no troubles with the raft coming off of the buildplate
Good replacement for original build tak that was on the monoprice i3
Pla sticks like a bomb and when i uses carbon fiber fill pla it tore holes into the buildtak when i tried removing the print
Competitiveness
Ive used buildtak on both my makerbot replicator original as well as my diy custom 3d printer
These are only about half as thick as the ones that came with my monoprice printers
Purchased this before the company released their removeable sheets that you can flex to remove the print
Overview
- How are reviewers describing this item?
surface, first and little. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 515 reviews as of our last analysis date on Feb 27 2021.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I use these on my fabtotum and also ordered glue sticks kapton tape blue tape etc so i could be super prepared for what i had read about 3d printing projects not sticking and failing to print
Posted by a reviewer on Amazon
I have the anycubic mega s and the glass building surface is extraordinarily adhesive
Posted by a reviewer on Amazon
Nothing has ever fallen off that surface
Posted by a reviewer on Amazon
Pla sticks like a bomb and when i uses carbon fiber fill pla it tore holes into the buildtak when i tried removing the print
Posted by a reviewer on Amazon
All prints stick every single time
Posted by a reviewer on Amazon
I tried the blue tape with glue the other specialty tape with and without glue wet blasted my aluminum bed to make it rougher so it adheres acetone and abs slurry which did ok but is quite the hassle and not to mention toxic and horrific smell with lots of prep with little to no success for abs and only slightly better with pla
Posted by a reviewer on Amazon
I figured i would give this a try at recommendation from a friend who has been researching different methods since he was having the same issues
Posted by a reviewer on Amazon
I figured that for less than 30 this was a more viable option before spending over 1500 and potentially having the same issues
Review Count History
