This analysis is outdated. Please reanalyze.

Pros & Cons

The AI used to provide these results are constantly improving. These results might change.

Pros

Cooler runs at 34° with a 27° ambient. At full load. Cooler keeps temps well under the chips max temp even on full load in a restricted case.

The heat sink is huge, it keeps my pc stable and cool even under stress testing. If it performs anything like the original it'll still be spinning for another ten years. Good easy mounting.

Probably the easiest aftermarket cooler to install. This had me sweating for a post in the hopes i hadn't cracked the ihs or the die.



Cons

The instructions are not great with the arctic freezer 7 pro. The amd retention bracket has to be completed by * two plates to either end of the bracket - and this requires the fan to be removed. The instructions given aren't much use at all and the i...  Read More

It is virtually impossible to install whilst the motherboard is in the case. Unless you have less than a full bank of ram chips it is unlikely to fit.

Was this feature helpful?

Highlights

The AI used to provide these results are constantly improving. These results might change.

Quality


I bought this to replace a stock amd wraith stealth cooler that was supplied with the ryzen 5 3600


Good dependable brand mounting was a little bit iffy with the bracket but lowered the temperature 10° over the stock cooler


Also do be careful with the fan


However i did have issues with the backplate the legs were too short but arctic do provide a special backplate for your motherb...  Read More

Price


Pro the cooling for the price is amazing and its not very loud cons the intel bracket is a bit scetchy as it is held in with cl...  Read More


I ordered this to replace the stock ryzen cooler it is much quieter than the wraith prism and slightly cooler

Competitiveness


Aesthetically this fan looks good and is able to fit in a matx case


Using on ryzen 3600 msi mortarmax gtx 1070does the job for the price i think


Installation on the socket fm2 was a doddle though you do need a long thin crosshead screwdriver


My 7 year old pc amd fx6100 6 core 3

Overview

  • How are reviewers describing this item?
    stock, good, great, quiet and easy.
  • Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
  • Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 109.
  • Our engine has discovered that over 90% high quality reviews are present.
  • This product had a total of 6,309 reviews as of our last analysis date on Nov 4 2022.

Helpful InsightsBETA

The AI used to provide these results are constantly improving. These results might change.

    Posted by a reviewer on Amazon

    Replaced stock amd stealth which was noisy on high workload


    Posted by a reviewer on Amazon

    Install used stock back plate loosely tightened thumb screws


    Posted by a reviewer on Amazon

    No cleaning wipe provided used alcohol cleaner to clean old wraith steal residuetook me 2030minsnext time maybe try had to push backplate against mb to get two main screws to bite


    Posted by a reviewer on Amazon

    If installing again id probably tape backplate against mb before placing cooler against cpu and apply pressure on screw to avoid messing up paste


    Posted by a reviewer on Amazon

    The media could not be loaded


    Posted by a reviewer on Amazon

    Had to open up pc again to check as it was so quiet i needed to check it was actually working


    Posted by a reviewer on Amazon

    The video told me to attach the base first and then the rest

Review Count History
Loading...
Price History
Loading...