Pros & Cons
Pros
It works with a ratio of 10 to 1. Spray a mold release on your project, generally 2 coats. It's a bit pricey, but you have to pay for quality.
Cons
Is 12:1 ratio. Their included instructions are a piece of paper. Buy their 1:1 mix, it makes a x1000000 more sense.
Highlights
Quality
This stuff solids up pretty quick and makes great molds
First time using this product and it pretty straight forward
I fiberglass over the second coat after 24 hours with a mold release between the fiberglass the pink silicone
Spray a mold release on your project generally 2 coats
Price
Its a bit pricey but you have to pay for quality
Overview
- How are reviewers describing this item?
good, pretty, second, unlikely and strong. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 6 reviews as of our last analysis date on May 5 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
It works with a ratio of 10 to 1
Posted by a reviewer on Amazon
Take a chip throw away brush cut the brush down spread it on
Posted by a reviewer on Amazon
First coat should be heavy but not running off
Posted by a reviewer on Amazon
I fiberglass over the second coat after 24 hours with a mold release between the fiberglass the pink silicone
Posted by a reviewer on Amazon
Its a bit pricey but you have to pay for quality