Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
It is available here on amazon. It comes in a flat 2oz. Kit.
Cons
Can't use it due to the garmin ball attachment doesn't fit securely. When i haphazardly jammed some tape in there to fix it securely, the arm just vibrates constantly as i drive. The entire image has motion blur rendering the camera useless.
Highlights
Quality
This mounting also provides the best view of the road and the gps unit is easily reachable while driving i could not reach it w... Read More
Fits perfectly so that can angle camera for best picture quality
You could probably dispense with the rubber strip entirely and just use electrical tape
Shipping
After a week of issues with shipping i was finally able to get my mount
Packaging/appearance
I ended up using the mirror clamp alone and shimmed the 16mm ball on it with a thin rubber sheet to fit the 17mm socket
Thats worked well so far and puts the camera right in front of the rear view mirror out of the way
Package of blue sticks similar looking to sticks of chewing gum
Competitiveness
Im using it to mount a garmin dashcam 10 on a 10 subaru forester
The problem is that the mount balls are a nominal 16mm but the garmin takes a nominal 17mm ball so it takes all those adapters ... Read More
The larger 17mm end is what goes into the garmin camera
Update i just installed mine even using the correct 17mm ball end it was still a tiny bit too loose than desired
Overview
- How are reviewers describing this item?
fit, two, good, small and double. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 86 reviews as of our last analysis date on Dec 16 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
The double ball clamp should be all metal with grip ridges inside to hold the position its set in better
Posted by a reviewer on Amazon
Following the instructions this is a slightly complicated mount
Posted by a reviewer on Amazon
Between the mirror mount and the camera there are 4 joints and as related by another reviewer the camera did vibrate a bit maybe too much
Posted by a reviewer on Amazon
The problem is that the mount balls are a nominal 16mm but the garmin takes a nominal 17mm ball so it takes all those adapters to get to that size
Posted by a reviewer on Amazon
I ended up using the mirror clamp alone and shimmed the 16mm ball on it with a thin rubber sheet to fit the 17mm socket
Posted by a reviewer on Amazon
It would be nice if they included a double ball piece with a 16 on one end and a 17 on the other so all youd need is the double ball clamp
Posted by a reviewer on Amazon
Not a suction device which is good
Posted by a reviewer on Amazon
A bit complicated to get mounted right and adjusted
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found