Posted by a reviewer on Amazon

I got this kwad to see just what kind of cheap cheap build i could come up with

Posted by a reviewer on Amazon

I have hit the ground at 40 plus mph and nothing was broken bent or cracked on the frame

Posted by a reviewer on Amazon

The leads from the escs to the motors could definitely be shortened up to better fit the escs on the arm frame so that there wouldnt be any interference between the esc board and the standoffs

Posted by a reviewer on Amazon

I ran into this when i was trying to switch the bullet conectors between the motors and the escs to flip motor rotation direction

Posted by a reviewer on Amazon

So my suggestion make sure the first time you plug the escs to the motor you make sure the front left and back right have a switched connection otherwise you may end up breaking off the motor connectors when you try to disconnect one of the esc leads

Posted by a reviewer on Amazon

I ended up having to purchase some extra plastic standoffs to stack the distribution board and the flight controller

Posted by a reviewer on Amazon

I also ran into an issue with the screws on one of the motors actually being too long and touching the motor windings and shorting the motor

Posted by a reviewer on Amazon

Luckily this didnt cause any damage just caused one of the motors to continue to spin after bringing throttle to 0