Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
Don't overthink this purchase. Took out a knee wall to create an open railing with balusters. Used these on oak railing going on on angle up the stairs. If you're handrail has a low profile you'll need to buy the low profile units.
Cons
Great idea but very poorly executed. Instructions are terrible.
The gear driven nut is horrible. The tightening mechanism is junk. The lag bolt gear piece (hex driver portion) must be made of inferior metal and striped out on the first two i attempted.
The nut has a hex key opening on the bottom so you can spin the fastener without any access. The fastener only seems to engage if you get the holes drilled exactly on center. I'd already measured and pre-drilled everything, so the holes are in the han... Read More
Had to cut it. Used wax and a bit slightly larger than 1/4, still broke one and had to pry it out with a chisel and wrench. Had to break seal and remove hardware and toss it. At this point i had to resort to clamping the rail.
Highlights
Quality
So very pleased with the end result
I am impressed with the cleverness of this simple system
The product works but the metal used could be better tensile strength if so it would be a great product
Shipping
Item as advertised fast shipping exactly what i needed
Packaging/appearance
Tldr use the instructions from the zipbolt packaging not the video for measurements
What happens here is that when you attempt to tighten the rail and newel post together the zipbolt nut thing comes to the end o... Read More
Make sure to either set your 134 paddle bit hole center at 234 back from the center of your bolt hole entrance after youve made... Read More
Competitiveness
The product came with clear instructions and was easy for a diyer to install
Overview
- How are reviewers describing this item?
easy, great, made, two and good. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 1,180 reviews as of our last analysis date on Dec 17 2023.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Once tightened and glued its as if the rail were one piece
Posted by a reviewer on Amazon
The instructions look complex but they really arent
Posted by a reviewer on Amazon
Dont overstress the hinge when installing the lag end
Posted by a reviewer on Amazon
Pro tip when inerting into hard woods like oak do not use the angled arm to thread it in
Posted by a reviewer on Amazon
Instead use locking pliers vicegrips ad much as you possibly can
Posted by a reviewer on Amazon
The knuckle will deform otherwise
Posted by a reviewer on Amazon
Just be very careful when installing
Posted by a reviewer on Amazon
Be cautious about spacing between the cam and where your first or last balusters fall
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found