This analysis is outdated. Please reanalyze.

Highlights

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

Quality


It’s among the cheapest available but the quality seems to be good.

Positive Review

Used it with the nzxt kraken x52 and it works great.

Positive Review

In addition, the fan quality is bad!

Negative Review

It will appear to fit to the naked eye, but the h55's waterblock will not make contact with the gpu unless you remove the basep...  Read More

Negative Review

The mounting brackets are slightly too large to fit with the baseplate on the card.

Neutral Review

Taking 1 star off because it seems like it would have been very easy to fit the mounting bracket with the baseplate.

Neutral Review

Price


Default stock evga 2080 ti black edition too hot,45c degrees at idle and 85c degrees fully load.

Neutral Review

:)all together this project cost me around $150 usd or so.

Neutral Review

Packaging/appearance


Lolbought a gelid cable to hook up the fan of the nzxt bracket to the card.

Positive Review

I re-used the thermal pads from the zotac stock cooler to mount copper heatsinks on the memory chips, and aluminum heatsinks on the vrms.

Neutral Review

Important note: be sure to check the product page on the nzxt website to ensure you get a cooler that is compatible with the bracket.

Neutral Review

Competitiveness


I've ordered a noctua nf-f12 ippc 2000 pwm, 4-pin, heavy duty cooling fan to replace the h55 radiator fan to hopefully lower th...  Read More

Positive Review

I use a nzxt manta case and my gpu temps were always above 70 degrees celsius.

Positive Review

Other thoughts:i bought this product knowing full well it was not technically compatible.

Negative Review

Hard to argue with those results, it did really good for me (when paired with a 240mm kraken).

Neutral Review

I mainly play destiny 2 and now i’m running stable at 144fps on a 1440p monitor.

Neutral Review
Overview
  • How are reviewers describing this item?
    fit, thermal, stock and full.
  • Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
  • Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 196.
  • Our engine has discovered that over 90% high quality reviews are present.
  • This product had a total of 802 reviews as of our last analysis date on Jun 24 2021.
Details

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

Most positive reviewquestion

Easy to install with Kraken x52.


Helpful Insights

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

    Posted by a reviewer on Amazon

    No pwm, no adapter to gpu fan header and very loud.


    Posted by a reviewer on Amazon

    The concept is cool, but there is little to no room to place a cooling solution (heatsinks) on the vram around the gpu, but there is room to put small heatsinks on the vrms.


    Posted by a reviewer on Amazon

    If you want to go this far, you'll want to look into some 5x5mm heatsinks for vrm and 14x14mm for the vram.


    Posted by a reviewer on Amazon

    In game temps went from avg 79c to 52c (keep in mind this was overclocking a stock 1560mhz to 1650mhz with an 87mv offset)last thing, the tt logo may have to be upside down in order for the hoses to the radiator to not be stretched to their limit.


    Posted by a reviewer on Amazon

    Didn't fit my gpu rx460, but it was my fault because i didn't see it was not on the support model list.


    Posted by a reviewer on Amazon

    The nvidia retention brackets not fit on rtx 20 series cards.


    Posted by a reviewer on Amazon

    Carefully not to over tight screws.

Review Count History
Loading...
Price History
Loading...