![embed-icon](<img alt="embed-icon" class="embed-icon" src="/assets/icn_embed-ef8cce3d74255322ddbf41b06cdc1f0c4fe34d169f0844e0a038087cc958b84d.svg" />)
What does this mean?
Trusted PartnerFakespot Verified Deals
DetailsBETA
Most positive review
I replaced a noisy off-brand 4cm cooling fan with this, and it has been one of the best upgrades I have made to my 3D printer.
Least positive review
Not enough review data to provide meaningful insight.
Most authentic review
I replaced a noisy off-brand 4cm cooling fan with this, and it has been one of the best upgrades I have made to my 3D printer.
Least authentic review
Not enough review data to provide meaningful insight.
Helpful InsightsBETA
Posted by a reviewer on Amazon
Unplug it from the mother board.
Posted by a reviewer on Amazon
The plug is not keyed and you can plug it backwards.
Posted by a reviewer on Amazon
The other watch out is since these fans are not synology exact replacements, you will get a beep code saying fan stops and start again.
Posted by a reviewer on Amazon
You will have to disable the beep with a fan error in the software which is pretty easy.
Posted by a reviewer on Amazon
The mounting silicon was very very brittle and hard to install.
Posted by a reviewer on Amazon
It literally doesn’t make any sound even in a completely silent room.
Posted by a reviewer on Amazon
These are silent unless you have your ear inches from it and the airflow is solid.
Posted by a reviewer on Amazon
I power my motherboard fan off the hotend fan header as opposed to the original design that powered it off the parts cooling fan so it is on whenever the hotened is heated because i noticed it never ran while i was printing abs due to the parts fan being off.
Review Count History
Price History
