This analysis is outdated. Please reanalyze.

VerifiedTrusted Partner

Fakespot Verified Deals

Question
Check out Amazon Deals provided by our trusted partner Brad's Deals!
Get Better Amazon Deals  White arrow
Highlights

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

Quality


Extremely happy with the final product, works well with arduino and the fastled library!

Positive Review

My son loves the quality of the leds.

Positive Review

Again product works flawlessly, leds are super bright, they don't get too hot when set to full brightness.

Neutral Review

It worked as expected with the controller from amazon

Neutral Review

Packaging/appearance


So i took some wire and soldered it to the esp8266 data, and held it to the first copper data input on every strip.

Neutral Review

Competitiveness


The strips are pretty easy to solder for a first timer dealing with this and they worked well with my adafruit 5v trinket!

Positive Review

These appear to be a high-quality well-made product.

Neutral Review

Like others i used these for a diy ambilight setup for my monitor.

Neutral Review
Overview
  • How are reviewers describing this item?
    great, bright, ordered, two and first.
  • Our AI detects a high amount of irrelevant reviews for this listing. A number of the reviews included in this product are may belong to other variations, editions or versions that may not be representative of the current product being sold.
  • Our engine has profiled the reviewer patterns and has determined that there is high deception involved.
  • Our engine has analyzed and discovered that 55.0% of the reviews are reliable.
  • This product had a total of 1,744 reviews as of our last analysis date on Dec 30 2020.
Details

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

Most positive reviewquestion

These neopixels worked great with RGB code at 5v without using a level shifter with a Raspberry Pi for my Cambot build.

Least positive reviewquestion

 Funciona exelente a 5v DC con el controlador sp101eFunciona con Google home por fairynest.Recomendado  Read More

Least authentic reviewquestion

These appear to be a high-quality well-made product. They are fully sealed in silicone but I would replace the JST connectors w...  Read More


Helpful Insights

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

    Posted by a reviewer on Amazon

    The issue i ran into was soldering them together from the back side - something probably 95% of people will never do.


    Posted by a reviewer on Amazon

    Problem: the signal pad on the back side is just a tiny bit past the exposed copper.


    Posted by a reviewer on Amazon

    Really, there should be 2 that are as far from the cut line as possible.


    Posted by a reviewer on Amazon

    I had to remove the whole set and solder from the front pad to the back.


    Posted by a reviewer on Amazon

    I had some doubts before getting these lights, as i hadn't seen too many comments about setting them up with a raspberry pi (and some comments regarding mechanical faults).


    Posted by a reviewer on Amazon

    The one thing that i had to do some digging around for is that the negative line also has to be tied to the raspberry pi for the data line to operate properly.

Review Count History
Loading...
Price History
Loading...