This analysis is outdated. Please reanalyze.

Highlights

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

Quality


05mm pads for my 1070 ti and 1060 graphics cards and i was surprised by the results.

Positive Review

The vrm temperatures went from a max of about 79 degrees celsius with the stock pads to a max of about 75 degrees with these new pads.

Positive Review

Working with the 1070 ti the normal temperatures ran (on average) about 45 c and with stress testing no more than 74 c.

Neutral Review

They are pliable and soft enough to assure a good cushioned contact with the chip surface area, while being firm enough to prov...  Read More

Neutral Review

Packaging/appearance


There is no actual adhesive that could damage labels on the nvme during reapplication or removal (damage or removal of the labe...  Read More

Negative Review

This was not efficiently transfering heat away from the nvme, but more likely trapping it and preventing air flow.

Neutral Review

I then ran the blackmagic speed test which writes and reads 5gb in repeated cycles.

Neutral Review

Competitiveness


These budget thermal pads seem to do a good job of reducing peak temperatures of nvme.

Positive Review

Also being a pc enthusiast i immediately thought of these thermal pads for heat management.

Positive Review

The average vrm temps were also about 5 degrees cooler according to hwinfo64.

Neutral Review

I installed a samsung evo 500gb nvme in my dell g5 and it was running very hot during heavy load testing (74°c).

Neutral Review
Overview
  • How are reviewers describing this item?
    thermal, great, good, easy and enough.
  • Our engine has profiled the reviewer patterns and has determined that there may be deception involved.
  • Our engine has determined that the review content quality is low.
  • Our engine has analyzed and discovered that 56.8% of the reviews are reliable.
  • This product had a total of 685 reviews as of our last analysis date on May 29 2021.
Details

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

Most positive reviewquestion

Used this product to fix thermals on an old broken phone that was bootlooping due to overheating - the phone now works perfect ...  Read More

Least authentic reviewquestion

Make sure to clean chips properly before use.If its not a brand new surface, use alcohol and cotton cloth to remove any oily re...  Read More


Helpful Insights

BETA

This feature is in BETA, meaning the algorithms used to provide these results are constantly improving. These results might change.

    Posted by a reviewer on Amazon

    They don't really go into the red anymore and if they do, it's only borderline.


    Posted by a reviewer on Amazon

    Working with the 1070 ti the normal temperatures ran (on average) about 45 c and with stress testing no more than 74 c.


    Posted by a reviewer on Amazon

    I installed a samsung evo 500gb nvme in my dell g5 and it was running very hot during heavy load testing (74°c).


    Posted by a reviewer on Amazon

    I purchased these thermal transfer pads since there was little space for a heat sink (heat spreader) in my laptop & i had noticed that part of the problem was that the heat shield/spreader that was originally installed over the 125gb sata nvme (this pos drive was only transfering at about 43gb/s - if you have this laptop replace this asap) was not fitting flushly over my new samsung evo nvme.


    Posted by a reviewer on Amazon

    After a little more examination and noticing how little airspace was over the shield i realized that further benefit could be realized by conducting heat from the sheild to the copper film on the inside back of the laptop cover.


    Posted by a reviewer on Amazon

    Idle after 20 minutes was running at 35°c (prior to modification it was idling at 43°c).


    Posted by a reviewer on Amazon

    After running the samsung magician performance test twice the temperature now was at 49°c as opposed to 63°c prior to this mod.


    Posted by a reviewer on Amazon

    I continued to test for another 16 iterations and the temperature was not rising above 55°c.

Review Count History
Loading...
Price History
Loading...