Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
These mounts use an aluminum screw to mount to the camera so you don't have to worry about rust outdoors. Match up with a drill bit, then use a mallet to hammer these into the wall then screw in the frame. Much more secure for outside mounting.
No issues, no rust. These solve that issue and are just as durable. No issues at all, very sturdy.
They rotate 360 degrees and swivel up and down to allow you to put your camera at almost any position. They are easy to reposition and lock securely.
Cons
This is outrageously annoying. The fabrication appears to have been done with no evidence of quality control.
The metal that is used to screw into the security camera recievier is extremely cheap and soft. This is the cheapest metal i have ever came across. Spend the money, buy arlo's oem mounts.
You have to tighten the cap to seat the bolt into the base of the bracket and as you turn the cap it turns the camera. The bolt attachment to the camera has a larger twist in the threads than your camera so while it does fit- it is not meant to secure... Read More
Highlights
Quality
This is a very good and sturdy product
Awkward to put up but once up great product
Product works great but i did break the end off trying to screw onto solar panel
Price
Excellent low cost option for mounting cameras
Packaging/appearance
I did not see any instructions in the boxbut if you have any mounting knowledge it’s pretty straight forward
Competitiveness
Wanted to use wit new eufy 2c cameras
Great easy to install very study a lot cheaper than the ones by the manufacturer
Overview
- How are reviewers describing this item?
easy, great, good, metal and cheap. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has discovered that over 80% high quality reviews are present.
- This product had a total of 1,819 reviews as of our last analysis date on Oct 1 2022.
Helpful InsightsBETA
Posted by a reviewer on Amazon
When positioning the camera it will move
Posted by a reviewer on Amazon
So you have to position it just right in order for it to hold the camera up
Posted by a reviewer on Amazon
The forth one does not tighten up after adjusting the view of the camera
Posted by a reviewer on Amazon
I cannot use it and chance damage to a 40 camera
Posted by a reviewer on Amazon
Does the job but i cracked one of them by tightening the screw too tight
Posted by a reviewer on Amazon
So just tighten the screws until its good and snug but no more
Posted by a reviewer on Amazon
Probably a little overbuilt for indoor use if out of reach
Posted by a reviewer on Amazon
If you find yourself here because steam hasnt restocked base stations and you need mounting hardware buy these
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found