DOZAWA Workbench Caster kit 700 ... vs SPACEKEEPER Workbench Caster kit...

All works smoothly. They extend a bit further in work area.

The frames, the hardware and the wheels are much beefier, heavier and stronger. I have a huge quartz work bench that probably weighs 300-400 pounds. Bought these for a router cabinet/bench.

You can eyeball/measure the install location by visually inspecting the mechanics of the foot lever. Predrilling the screw holes is needed.

They tend to drop to the stationary position when i move the saw. When i raise my bench they are not perpendicular to the floor. No measurements or even suggestions on instillation height.

What a bummer. Only for the purpose of saving other people money aggravation and possible injury.

The spacekeeper casters raise the bench easily and make it easy to maneuver. When working on large items that are longer that the bench, such as long pieces of lumber, i pull the bench out into the open area to give room for lumber to lap over ends of...  Read More

The kit includes all screws, locking nuts required, as well as low cost assembly wrenches with which to tighten the bolts. The screws seem to be made of a soft metal combined with a small phillip's head.

The lever is extremely hard to press. The wheel brwcket and foot pedal is garbage. I'm thinking about upgrading to the 880 lbs rated wheels, but i'm hesitant because they may have the same "structural" defect.

The bolts for the kit are two short. Also, the mounting screws are made of cheap white metal that strip.

Do not use the template. That is wrong. Sending back. What a waste of time. Very disappointed in these.