What does this mean?
Ask Fakespot Chat questions about this productAlpha
Initializing Fakespot Chat
System error,
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
Pros & Cons
Pros
The replicator creator pro is a dual-extruder 3d printer. It uses flashprint software and simplify3d as a slicer. It prints pla, petg, carbon fiber, and wood grain filament.
The accuracy and precision really blows my mind. The bibo is acceptable, some stepper movements are noisier than usual. The quality and flashforge support is unmatched with a 1-year warranty.
Great printer, aesthetically pleasing, fairly easy to use with no experience. Printer seems to be what it proclaims.
It automates most steps, but to navigate all options it does help to be willing to get a bit technical. Ease of use is very good for someone who has had a 3d printer before, not so great for absolute beginners.
Octoprint comes with a cardboard card that's used to level the print bed. There are three knobs below the bed, and the card has a diagram to tell you which way to turn the knobs to raise or lower. The included leveling card is also handy, though i sti... Read More
Cons
Blobs all over the place, stringing, and just an overall waste of time and effort. The supplied software makes it difficult, nearly impossible to connect the printer to any computer using usb or wi-fi.
The top of print jobs looks like it came from an ice cream dispenser. Printing must be done very slowly to prevent the belts from slipping. Print shifting, clogging in the head.
Time estimated for return, money reimbursement, and new order is over 10 days. Amazon isn't even listed as an authorized re-seller! However, it seems to me this is more a production packaging issue (i saw a couple of unboxing videos where the acrylic ... Read More
The spool holder design fails here, in that the spools are too far from the enclosure where the tubes pull the filament. No matter how tight the belts are, they slip terribly, because the pulleys are all plastic. The left nozzle will pass by the plast... Read More
The extruders are, thankfully, both at the same height, but they don't seem to be calibrated correctly. The tiny wing nuts are very cheap and cut your fingers trying to adjust the build plate.
Highlights
Quality
Amazing print quality after over 200 big prints only jammed once
It is very accurate and well made
My very first 3d printer have had it about 56 weeks been thrue 3 rolls of filiment
So far we have over 4000 print hours on our creator pro and just experienced our first issue where the thermocouple wire’s insu... Read More
Price
Its insanely capable for a 300 or even 400 machine
You will be able to do pretty much anything you want with this printer especially for the price
So first things first i couldnt pass up this printer for 300
In conclusion i daily use run production with printers ranging from a few hundred bucks creality and flashforge to 50000 straty... Read More
Shipping
So i emailed him and within a couple hours he sent me a detailed response with pictures links and video
A few weeks later a replacement bed assembly arrived
Packaging/appearance
Packaging is superb case is heavy duty and printer has been very precise
His name and email where placed right on top when i opened the box
Competitiveness
Even then it’s shocking because compared to other printersslicing software this thing is a breeze to print with
For beginners like us i dont think any other printer would have worked significantly better or been any easier to use and this ... Read More
Also i dont have other machines to compare to but it does make a bit of fan noise and also when printing sounds a bit like r2d2
Print quality is better than the k1 but can’t print all the other filament the k1 can
Overview
- How are reviewers describing this item?
first, false, great, good and easy. - Our engine has profiled the reviewer patterns and has determined that there is minimal deception involved.
- Our engine has determined that the review content quality is high and informative.
- Our engine has detected that Amazon has altered, modified or removed reviews from this listing. We approximate total reviews altered up to 102.
- Our engine has discovered that over 90% high quality reviews are present.
- This product had a total of 1,352 reviews as of our last analysis date on Apr 9 2024.
Helpful InsightsBETA
Posted by a reviewer on Amazon
I hate that they are advertising “open source” and “klipper” yet have it locked down at this time to where you aren’t able to root it
Posted by a reviewer on Amazon
Belts and pulleys are a bit loud after only 5 prints and the hotend clicks when getting up to temperature
Posted by a reviewer on Amazon
Be sure to click the leveling before starting the print
Posted by a reviewer on Amazon
Wish it came with better antivibration feet as one was shorter than the rest and don’t reduce much vibration
Posted by a reviewer on Amazon
In the end i printed tpu feet like from the creality k1 that fit
Posted by a reviewer on Amazon
Print quality is better than the k1 but can’t print all the other filament the k1 can
Posted by a reviewer on Amazon
So first things first i couldnt pass up this printer for 300
Posted by a reviewer on Amazon
But i wanted it enclosed so i used 25 in pla and 45 in acrylic and have it all done minus magnets to hold the front door
Review Count History
Price History
Ask Fakespot Chat questions about this productAlpha
Initializing Fakespot Chat
System error,
Add detailed feedback
Message
Loading suggested questions
Suggested Questions
Suggested Questions
No suggested questions were found
